Extreme water and oil-repellent protection.
What's it for
Suitable for:
Advantages:
Dilution: No dilution required: The product is ready to use.
Application for materials with matt finish (indoors and outdoors):
Apply the product evenly and continuously on a clean and dry surface using a brush or fleece pad, wetting the grout lines as well. Dab any excess product with a clean cloth before it dries (roughly 10-15 minutes).
Application for glossy or brushed finishes (indoors and outdoors):
Apply FOB XTREME on a clean and dry surface, wetting the material and grout lines completely using a brush or fleece pad. Before the product dries (roughly 10-15 minutes), rub the surface and remove any residues using a microfibre cloth wetted with the product. Dry the surface with a clean cloth. When requested on high-absorption materials, apply two coats of the product with an 8-hour interval in between (e.g.: highly-trafficked areas, humid areas, outdoor surfaces). To speed up the process, it is possible to treat the surface with a single-disc floor scrubber. To complete the cycle with the finish: on porous materials such as natural stone, reconstructed tiles, agglomerates and concrete tiles laid in indoor environments, a finishing wax can be applied depending on the material and on the desired effect (MATT, SATIN, CLASSIC, LONGLIFE). The surface can be walked on after just 8 hours. The stain-proofing effect starts after 24 hours.
Maintenance:
Use a diluted solution of CLEANER PRO.
Please note: Never apply FOB EXTREME onto a surface that is already waxed. Do not apply FOB EXTREME during the hottest hours of the day in summer. Carry out a patch test on a small surface area to check for any changes in colour. Do not apply the product externally if rain is forecast. Does not protect against acidic aggression.
Coverage with 1L: | |
Stone | 10-30m² |
Terracotta rustic Tuscan, polished | 15-20m² |
Terracotta handmade, Spanish, hollow tile, brick | up to 10m² |
Concrete | up to 5m² |
Marble/granite | up to 30m² |
Application temp. | +5°C - +30°C |
Packaging | 1L |
Warnings: | Keep out of reach of children. Do not disperse into the environment after use. Ventilate the area if applied on internal surfaces. The use of a single-disc cleaning machine is permitted only if it is perfectly undamaged. Outdoor flooring must be properly laid before being treated and must satisfy all specific requirements, including: adequate sloping, properly executed expansion joints, perfect insulation from underlying ground, proven compatibility with sub-zero temperatures. Does not protect marble and limestone from acid. |
Grout protector.
What's it for
Suitable for:
Advantages:
Dilution: No dilution required: The product is ready to use.
Application:
Spray Fuga Proof directly onto the clean and dry surface at a distance of roughly 10-15cm away from the application point. Rub into the grouting with a sponge to improve penetration. Fully remove any residues within 5 minutes, either manually using a clean cloth or absorbent paper towel. Treat a small area at a time (1m2).The floor can be walked on after 8 hours. Any remaining residues on the surface can be removed with Fila Cleaner diluted 1:30.
Please note: Wait at least 24 hours before wetting the surface. Do not apply the product externally if rain is forecast.
Coverage with 1L: | up to 600 linear metres |
Application temp. | +10°C - +30°C |
Packaging | 500ml bottle with spray nozzle. |
Composition | Water suspension of organic resins. |
Warnings: | Keep out of reach of children. Do not disperse into the environment after use. Protect can from frost. |
Water-repellent protection.
What's it for
Suitable for:
Advantages:
Dilution: No dilution required: The product is ready to use.
Application:
Apply HYDROREP on a clean and dry surface using a brush or other application method in a regular manner, with two coats with an 8-hour interval in between. In case of poorly absorbent stone surfaces (e.g. slate), a single coat of the product is sufficient. To complete the cycle with an oil-repellent protection: apply the FOB XTREMEstain-proofing protective agent instead of the second coat of HYDROREP. The surface can be walked on after just 4 hours. The water-repellent effect starts after 24 hours.
FOR PROFESSIONAL USE ONLY:
Spray the product (airless system) on vertical surfaces until they are saturated and use appropriate PPE, as specified in the safety information sheet.
Please note: On natural stone carry out a patch test on a small surface area to check for any changes in colour. Do not apply the product externally if rain is forecast. Does not protect against acidic aggression.
Coverage with 1L: | |
Natural stone | 10-20m² |
Concrete | up to 5m² |
Application temp. | +5°C - +30°C |
Packaging | 5L |
Warnings: | Keep out of reach of children. Do not disperse into the environment after use. Does not protect against acidic aggression. The use of a single-disc cleaning machine is permitted only if it is perfectly undamaged. Outdoor flooring must be properly laid before being treated and must satisfy all specific requirements, including: adequate sloping, properly executed expansion joints, perfect insulation from underlying ground, proven compatibility with sub-zero temperatures. |
Stain-proofing for polished surfaces.
What's it for
Suitable for:
Advantages:
Dilution: No dilution required: The product is ready to use.
Application:
1 Using a paintbrush, apply the product evenly and continually to a clean dry surface.
2 After 24 hours, when the floor is dry, remove any residues with a cloth dampened with the same product. Dry with a dry cloth or kitchen towel.
Maintenance:
Diluted solution of Fila Cleaner.
Please note: Before applying to the entire surface, test the product on a small area to check for colour changes. Do not apply the product externally if rain is forecast.
Coverage with 1L: | |
Marble / Granite | 30m² |
Porcelain tiles | 30-40m² |
Terrazzo | up to 20m² |
Application temp. | +5°C - +30°C |
Packaging | 250ml & 1L |
Composition | A mixture of silicon compounds dispersed in de-aromatised hydrocarbon solvent. |
Warnings: | Keep out of reach of children. Do not disperse into the environment after use. Ventilate the premises well during use and while the product is drying. It does not protect marble and limestone from acid. The use of a single-disc cleaning machine is permitted only if it is perfectly undamaged. |
Water- and oil-repellent protection with natural effect.
What's it for
Suitable for:
Advantages:
Dilution: No dilution required: The product is ready to use.
Application: Shake well before use.
For materials with matt finish (natural stone, terracotta, agglomerates, concrete tiles):
Apply MP90 ECO XTREME evenly and continuously on a clean and dry surface using a brush or fleece pad, wetting the grout lines as well. Dab any excess product with a clean cloth before it dries. On highly absorbent materials, apply two coats of product with a 20-minute interval in between.
For polished porcelain tiles, natural stone, agglomerates with glossy finish:
Apply MP90 ECO XTREME on a clean and dry surface, wetting the material and grout lines completely using a brush or fleece pad. Before the product dries (roughly 10-15 minutes), rub it using a microfibre cloth wetted with the product to favour its penetration. Dry the surface with a clean cloth. To speed up the process, it is possible to treat the surface with a single-disc floor scrubber.
To complete the cycle with the finish on porous materials such as natural stone, reconstructed tiles, agglomerates and concrete tiles laid in indoor environments:
A finishing wax can be applied depending on the material and on the desired effect (MATT, SATIN, CLASSIC, LONGLIFE). The surface can be walked on after just 2 hours. Water- and oil-repellent protection takes effect after 24 hours.
Maintenance: use a diluted solution of CLEANER PRO.
Please note: Before applying to the entire surface, test the product on a small area to check for colour changes. Do not apply the product externally if rain is forecast. Does not protect against acidic aggression.
Coverage with 1L: | |
Polished porcelain tiles | 30-50m² |
Polished marble/granite | 20-30m² |
Matte honed stone | 10-20m² |
Application temp. | +5°C - +30°C |
Packaging | 375ml & 1L |
Warnings: | Keep out of reach of children. Outdoor flooring must be properly laid before being treated and must satisfy all the specific requirements, including: adequate sloping, properly executed expansion joints, perfect isolation from the underlying ground, proven compa-tibility with sub-zero temperatures. Ventilate the premises well during use and while the product is drying. Does not protect against acidic aggression. |
Dirt repellent protector for semi-polished (lappato) porcelain tiles.
What's it for
Suitable for:
Advantages:
Dilution: No dilution required: The product is ready to use.
Application: Shake well before use.
Application after laying on new surfaces:
Wash the floor thoroughly with DETERDEK (cement, grouting) or FILA CR10 (epoxy grouting).
Apply FILA PD15 to clean dry floor and grouting, covering evenly with a paintbrush, sponge or fleece applicator pad.
Rub in with sponge, cloth or single-brush machine (white disc) to help the product penetrate and remove any residue completely within 10 minutes after application.
To completely remove stubborn residues, rub the surface with a cloth soaked in the product.
The surface is ready for use after 8 hours.
Application on untreated surfaces to be restored to original appearance:
Wash the floor with FILA PS87 and/or DETERDEK.
Apply FILA PD15 to clean dry floor, following the instructions above.
Maintenance: use a diluted solution of CLEANER PRO.
Please note: Remove any excess of product completely from the surface within 10 minutes. After any longer, the product becomes difficult to remove. It may enhance the colour of the material and/or grouting; carry out a spot test beforehand to check for any changes in colour.
Coverage with 1L: | |
Semi-polished porcelain tiles | up to 70m² |
Application temp. | +5°C - +30°C |
Packaging | 1L |
Warnings: | This is a solvent-based product; we recommend airing the room during application. |
Pre-grouting protective agent.
What's it for
Suitable for:
Advantages:
Dilution: No dilution required: The product is ready to use.
Application: Shake well before use.
Remove any dust from the surface to be treated. Apply one coat of PRW200 using a flat paintbrush, fleece or other applicator in a uniform manner, avoiding any pooling. Also apply to the edges of the laid material with care. The surface can be grouted the day after application. Once thoroughly set, wash the surface using the most suitable cleaner for the type of material used. Assess which type of subsequent protective treatment to complete the protection cycle.
FOR PROFESSIONAL USE ONLY:
Spray the product (airless system) on vertical surfaces until they are saturated and use appropriate PPE, as specified in the safety information sheet.
Please note: Carry out a patch test on a small surface area to check for any changes in colour. Do not apply the product externally if rain is forecast.
Coverage with 1L: | |
Terracotta, rustic Tuscan, polished | 15-20m² |
Terracotta handmade, Spanish, hollow tile, brick | 7-10m² |
Stone | 10-20m² |
Application temp. | +5°C - +30°C |
Packaging | 1 & 5L |
Warnings: | Keep out of reach of children. Do not disperse into the environment after use. |
Dirt repellent.
What's it for
Suitable for:
Advantages:
Dilution: No dilution required: The product is ready to use.
Application for new installations:
Wash the floor thoroughly using Deterdek (cement grout) or Fila CR10 (epoxy grout).
Apply Fila Stop Dirt to a clean and dry floor also treating the grout, covering evenly with a fleece or other suitable applicator. Advice from the expert: Given the product’s high coverage, apply a moderate quantity of product to treat 2 - 3m² of surface area at a time.
Rub the surface with a cloth or floor scrubber with white disc.
Fully remove any residues within 10 minutes, either manually using a microfibre cloth or with a single-disc floor scrubber.
Application on untreated surface to be restored:
Wash the floor using Fila PS87 and/or Deterdek.
Apply Fila Stop Dirt on the dry surface in the manner described above.
Please note: The product may enhance the colour of the material or grouting; carry out a spot test beforehand. Aerate rooms during use. Do not apply to matt-finish lappato porcelain tiles.
Coverage with 1L: | |
Textured, natural and lappato porcelain tiles | up to 70m² |
Application temp. | +5°C - +30°C |
Packaging | 500ml |
Composition | A mixture of silicone resins dispersed in dearomatised hydrocarbon solvent. |
Warnings: | This is a solvent-based product, the room should be aerated during application. Keep out of reach of children. Do not disperse into the environment after use. The use of a single-disc cleaning machine is permitted only if it is perfectly undamaged. |
Colour enhancer and stain-proofing protection.
What's it for
Suitable for:
Advantages:
Dilution: No dilution required: ready to use
Application:
Apply Fila Stone Plus on dry surfaces using a brush, sponge or other appropriate tool. During application, rub the surface with a sponge or a cloth, so that the product penetrates and any excess can be removed. The floor is ready for use after about 8 hours. To improve colour revival, apply several coats of the product within 8 hour intervals.
Maintenance: diluted solution of Fila Cleaner.
For professional use only:
Spray the product (airless system) on vertical surfaces until they are saturated and use appropriate PPE, as indicated in the safety information sheet.
Please note: Once treated with Fila Stone Plus, the stone surface cannot be restored to its original condition: before treating the surface, carry out a spot test to verify the final colour effect. It is recommended, for external surfaces, to repeat the treatment every year so that the enhancing effect is assured. It does not protect marble and limestone from acid. Do not apply the product externally if rain is forecast.
Coverage with 1L: | |
Polished stone | 30-50m² |
Unpolished stone | 15-25m² |
Application temp. | +5°C - +30°C |
Packaging | 250ml & 1L |
Composition | A mixture of silicon compounds dispersed in de-aromatised hydrocarbon solvent. |
Warnings: | Keep out of reach of children. Do not disperse into the environment after use. The use of a single-disc cleaning machine is permitted only if it is perfectly undamaged. |
Water-based stain protector for unpolished surfaces.
What's it for
Suitable for:
Advantages:
Dilution: No dilution required: The product is ready to use.
Application indoor surfaces in terracotta and untreated stone:
On a clean and dry surface, apply one coat of Fila W68, evenly, using a paintbrush or fleece pad, also soaking the joints well. Wait 4 hours, then apply a coat of Fila Jet. Wait at least an hour, then apply a coat of the specific finishing wax for the effect desired (Fila Matt: natural; Fila Satin: satin; Fila Classic and Fila Long Life: glossy).
Application internal surfaces in terracotta and polished stone:
On a clean and dry surface, apply one coat of Fila W68, evenly, using a paintbrush or fleece pad, also soaking the joints well. Wait 4 hours and then, apply a coat of Fila Jet and following with the deisired wax (Fila Matt: natural; Fila Satin: satin; Fila Classic and Fila Long Life: glossy).
Outdoor surfaces in terracotta, stone and concrete:
On a clean surface, apply 2 coats of Fila W68 evenly, using a paintbrush or fleece pad, also soaking the joints well.
Maintenance:
Diluted solution of Fila Cleaner.
Please note: Carry out a patch test on a small surface area to check for any changes in colour. Do not apply the product externally if rain is forecast.
Coverage with 1L: | |
Marble / Granite | 30m² |
Terracotta rustic Tuscan, polished | 15-20m² |
Cement, Terracotta handmade, Spanish, hollow tile, brick | 7-10m² |
Stone | 10-20m² |
Application temp. | +10°C - +30°C |
Packaging | 1L |
Composition | Water suspension of organic resins. |
Warnings: | Keep out of reach of children. Do not disperse into the environment after use. Protect can from frost. Store at room temperature. Outdoor flooring must be properly laid before being treated and must satisfy all the specific requirements, including: adequate sloping, properly executed expansion joints, perfect isolation from the underlying ground, proven compatibility with sub-zero temperatures. It does not protect marble and limestone from acid. |
"Wet look" effect and water and oil repellent.
What's it for
Suitable for:
Advantages:
Dilution: No dilution required: ready to use.
Application:
On a clean and dry surface, apply one even and continuous coat of Fila Wet with a brush. After 24 hours repeat treatment in the same way. For very absorbent materials, a third coat may be required to reach the desired wet effect.
Maintenance:
Diluted solutions of Fila Cleaner. In the areas most exposed to weather conditions we recommend applying the product again every two years.
Please note: Do not apply the product externally if rain is forecast during the following 24 hours. Do not walk on floor while it's drying: wait 24 hours after last product application. In the areas most exposed to weather conditions we recommend applying the product again every two years. Do not apply on terracotta floors or polished/very smooth surfaces. If product has been wrongly applied or if a thorough cleaning is required, remove Fila Wet using Fila No Paint Star. The product cannot be applied to supports with problems connected with rising damp.
Coverage with 1L: | 10-20m² |
Application temp. | +5°C - +30°C |
Packaging | 1L |
Composition | Synthetic resins dispersed in aromatic hydrocarbon solvent. Fixative primers (consolidator). |
Warnings: | Keep out of reach of children. Do not disperse into the environment after use. If used indoors, it is advisable to ventilate the area well. The use of a single-disc cleaning machine is permitted only if it is perfectly undamaged. Outdoor flooring must be properly laid before being treated and must satisfy all specific requirements, including: adequate sloping, properly executed expansion joints, perfect insulation from underlying ground, proven compatibility with sub-zero temperatures. |